Skip to content Skip to sidebar Skip to footer

Widget Atas Posting

Idealarc® DC600 W/ VRD™ Multi-Process Welder - K1288-28 What Is Vrd In Welding Machine

Hallo ! Welcome to the a site all about welder, This a site was created as a means to provide a variety of education, especially relating to welder activities. this session author will discuss "Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28" clearly, come along see more...

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

Industrial DC Multi-Process Welders

Rugged construction, simple controls and a 100% duty cycle output rating make these machines a sound investment for heavy duty shop applications. Add the outstanding traditional SCR rectifier arc action delivering high quality, attractive welds and your operators will agree – it’s hard to go wrong with an Idealarc® 600.

  • Full range output voltage control for easy operation and precise control.
  • Standard analog ammeter and voltmeter.
  • VRD™ (Voltage Reduction Device™) reduces OCV (open circuit voltage) when not welding for added safety (select models).
  • Mode switch for selecting desired output characteristics.
  • 115V, 15 amps, duplex auxiliary power receptacle – (60 Hz models) makes it easy to power lights, grinders and other shop tools at your work station.
  • Flat-top case with a small footprint can be placed under a workbench or stacked up to 3 high on top of each other.
  • Windings and rectifiers are protected against moisture and corrosive environments.
  • Seven-year warranty on power rectifier.

The VRD™ (Voltage Reduction Device™) provides an additional measure of safety, especially when working in an environment with a higher risk of electrical shock such as wet areas and hot, humid, sweaty conditions. The VRD™ reduces the OCV (open circuit voltage) at the welding output terminals while not welding to less than 2 volts DC. Indicator lights will also signal when output voltage during welding is above or below 30 volts DC.

Use of VRD™ does not degrade the DC600 machine rating or the ability to drive current through cables up to 200 ft. (61 m). No new welding techniques are required. The internal system does not require separate modules to operate (available on select models).

Input Power
  • 230/460/575/3/60
Rated Output
  • 600A/44V/100%
  • 680A44V/60%
Input Current
  • 108/54/43A
Output Range
  • CV:70A/13V - 780A/44V
  • CC:90A/24V - 780A/44V
Dimensions (H x W x D) 30.75 in x 22.25 in x 39 in (781 mm x 567 mm x 988 mm)
Net Weight 554.00 (251.29 kg)

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

1. Local/Remote Switch

2. Output Control

3. Welding Mode Switch

4. Circuit Breakers

5. Weld Terminals On or Remotely Controlled

6. On/Off Switch

7. Power Source Pilot Light

8. Ammeter/Voltmeter

9. VRD™ (select models)

Category

Product Number

Product Name

General

Multi-Process Switch

General

All Terrain Undercarriage

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

General

Paralleling Kit for DC-600 Codes Above 10500

General

Paralleling Kit for DC-600 Codes Below 10500 and DC-1000’s

General

Adapter Cable - Female 14 pin Control Cable to Terminal Strip

Stick

Accessory Kit - 400 Amp

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

Stick

Remote Output Control 6 Pin - 25 ft. (7.6 m)

Stick

Remote Output Control 6 Pin - 100 ft. (30.5 m)

Stick

Remote Control Adapter

TIG

Foot Amptrol™ - 25 ft. (7.6m) (6 pin)

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

TIG

Deluxe Adjustable Gas Regulator and Hose Kit

Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28

That's the article will be useful for those who read it. Thank you for your visit

article sourced from https://www.lincolnelectric.com/en-us/Equipment/Pages/product.aspx?product=K1288-28(LincolnElectric)

Don't forget to bookmark "Idealarc® DC600 w/ VRD™ Multi-Process Welder - K1288-28" using Ctrl + D or Command + D (Macos). You can share this article using the share button.

Post a Comment for "Idealarc® DC600 W/ VRD™ Multi-Process Welder - K1288-28 What Is Vrd In Welding Machine"

Berlangganan via Email