Skip to content Skip to sidebar Skip to footer

Widget Atas Posting

Flux-Cored Arc Welding Techniques Use Of Backhand Welding

Hi ! Welcome to the a site all about welder, This a site was created as a means to provide a variety of understanding, especially relating to welder actions. this session author will discuss "Flux-Cored Arc Welding Techniques" thoroughly, hurry up see more...

Flux-Cored Arc Welding Techniques

The techniques used in flux-cored arc welding are much the same as those used in other welding methods—especially MIG welding.  The electrode type, the flux type, the metal thickness, and the welding position will help determine which technique might work best on a certain project.

Flux-Cored Arc Welding Techniques use of backhand welding

Backhand Technique

The backhand technique is often used with self-shielded flux-cored arc welding.  This technique is achieved by passing the electrode along the welding site in the direction opposite that of welding. 

When using the backhand technique, the handle of the welder is dragged like a stick welder.  This technique works well when welding in the flat and horizontal positions.  It may also be an option when welding in the 4G position to avoid being hit by spatter.

The backhand welding method creates a weld that is high and narrow—one that penetrates deeply.  A disadvantage of using the backhand technique is that the weld puddle is a bit harder to see.  As in stick welding, you need to keep an eye on the weld puddle size behind the crater.

Forehand Technique

The forehand welding technique is often used with gas-shielded flux-cored arc welding.  The forehand process requires the electrode to be moved along the work site in the same direction as the welding. 

Flux-Cored Arc Welding Techniques use of backhand welding

The forehand method is often used when working with thinner metals.  It may be the best method to use when welding in the vertical up position and for overhead fillet welds (4F).  The forehand technique can also be used in the flat and horizontal positions.

Unlike the backhand method, the forehand welding technique makes it easy to see the weld puddle.  As a result, it is also easier to see the weld joint and to keep from wandering off the joint. 

With the forehand technique, it is important to try to keep the travel angle just right, so as to prevent excessive accumulation of spatter.

Stringer Bead and Weave Bead Techniques

The stringer bead welding technique is one in which the weld beads are deposited in a straight line.  When using the weave bead technique, the weld beads are deposited in a zigzag formation. 

Flux-Cored Arc Welding Techniques use of backhand welding

The forward weld travel speed of the stringer bead method is faster than that of the weave bead method.  This faster travel speed reduces the amount of heat input, which is desirable when welding T-1 steels.

The straight bead technique works well in any position.  If welding in the vertical position, however, a partial weave may be preferable.  Although the partial weave can make the welding process easier in this position, the weave total should not exceed twice the electrode diameter.

In FCAW, the stringer bead method is more commonly used.  The weave bead method may be used occasionally, but most flux cored electrodes are designed for stringer beads.

Related Article -

Flux-Cored Arc Welding Techniques use of backhand welding

Flux-Cored Arc Welding Techniques

Flux-Cored Arc Welding Techniques use of backhand welding

That's the session will be useful for those who read it. Thank you for your visit

Don't forget to bookmark "Flux-Cored Arc Welding Techniques" using Ctrl + D or Command + D (Macos). You can share this posting using the share button.

Post a Comment for "Flux-Cored Arc Welding Techniques Use Of Backhand Welding"